Setu Industries

• Efficient design and performance as available in international market.

• Automatic air releasing while priming is design specialty with added feature of quick self priming.

• No need of foot valve.

• Easy maintenance and spares availability.

• Design of impeller is semi open / open vane type for no clogging and enables to handle solid particles up to       40 mm.

• Back pull out design for repair possible without disturbing pipe lines.

• All rotating parts are dynamically balanced for smooth running and low vibration.

• Long product life due to replaceable wearing parts.

• Motor designed for wide voltage fluctuation for mono block pump sets,

   From 180 to 240 volts for single phase pumps

   From 350 to 450 volts for three phase pumps

• All pumps are available with gland packing or mechanical seal.

• Available in bare shaft pump, mono block pump, motor coupled pump and diesel engine coupled pump design.

Applications

 

Industry

• Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension, clean or dirty low viscosity petroleum product or solvents, milk of lime, caustic soda.

 • Washing, cooling, circulation, smoke scrubbing, emergency duty.

• Pumping light chemical, sewage, ash water.

• Tiles, marble & ceramic factories, effluent plants.

• Industries for clear water handling at high pressures.

 

Waste Treatment

• pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension, dosing neutralizing liquids, pumping out settled sludge.

 

Public Utilities

• For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.

• Dewatering basements, trenches and construction sites.

• Dewatering from basements, multi storey, shopping malls, godowns etc.

• Flood drainage, sewage pumping, fire fighting, and recovery of dangerous liquids.

 

Mobile Machinery

• Cooling water for marine engines and shovels.

• Any application where priming is to be avoided.

 

Construction Industry

• Dewatering excavation, canals or ponds, ground water dewatering with well point system or drains, water supply from wells or canals, hosing down concrete castings.

 

Agriculture

• Surface irrigation, liquid manure oxygenation, transfer and spraying liquid manure or fertilizers, distribution of liquid animal feed, transfer of must, washing.

 

Marine

• Loading and unloading, bilge pumping, washing, fire fighting, stripping, sanitary duty and circulation.

Additional Information:

• Packaging Details: PUMP IS COVERED BY A PLASTIC BAG THEN PLACED IN FULLY SECURED WOODEN BOX.

Known for its efficiency, seamless finish, durability and functionality, the offered Mud Sewage Pump is precisely engineered from quality assured stainless steel. Offered pumps are used in sewage water treatment purposes. These pumps are designed in accord with the industry set norms and regulations. 

Features:

• Longer functional life
• Corrosion resistant
• Rugged and durable construction

Additional Information:

• Delivery Time: As per customer requirement
• Packaging Details: Box Packaging

Features

 

• Efficient design and performance as available in international market.

• Automatic air releasing while priming is design specialty with added feature of quick self priming.

• No need of foot valve.

• Easy maintenance and spares availability.

• Design of impeller is semi open / open vane type for no clogging and enables to handle solid particles up to       40 mm.

• Back pull out design for repair possible without disturbing pipe lines.

• All rotating parts are dynamically balanced for smooth running and low vibration.

• Long product life due to replaceable wearing parts.

• Motor designed for wide voltage fluctuation for mono block pump sets,

   From 180 to 240 volts for single phase pumps

   From 350 to 450 volts for three phase pumps

• All pumps are available with gland packing or mechanical seal.

• Available in bare shaft pump, mono block pump, motor coupled pump and diesel engine coupled pump design. 

Applications

 

Industry

• Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension, clean or dirty low viscosity petroleum product or solvents, milk of lime, caustic soda.

 • Washing, cooling, circulation, smoke scrubbing, emergency duty.

• Pumping light chemical, sewage, ash water.

• Tiles, marble & ceramic factories, effluent plants.

• Industries for clear water handling at high pressures.

 

Waste Treatment

• pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension, dosing neutralizing liquids, pumping out settled sludge.

 

Public Utilities

• For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.

• Dewatering basements, trenches and construction sites.

• Dewatering from basements, multi storey, shopping malls, godowns etc.

• Flood drainage, sewage pumping, fire fighting, and recovery of dangerous liquids.

 

Mobile Machinery

• Cooling water for marine engines and shovels.

• Any application where priming is to be avoided.

 

Construction Industry

• Dewatering excavation, canals or ponds, ground water dewatering with well point system or drains, water supply from wells or canals, hosing down concrete castings.

 

Agriculture

• Surface irrigation, liquid manure oxygenation, transfer and spraying liquid manure or fertilizers, distribution of liquid animal feed, transfer of must, washing.

 

Marine

• Loading and unloading, bilge pumping, washing, fire fighting, stripping, sanitary duty and circulation.

• Efficient design and performance as available in international market.

• Automatic air releasing while priming is design specialty with added feature of quick self priming.

• No need of foot valve.

• Easy maintenance and spares availability.

• Design of impeller is semi open / open vane type for no clogging and enables to handle solid particles up to       40 mm.

• Back pull out design for repair possible without disturbing pipe lines.

• All rotating parts are dynamically balanced for smooth running and low vibration.

• Long product life due to replaceable wearing parts.

• Motor designed for wide voltage fluctuation for mono block pump sets,

   From 180 to 240 volts for single phase pumps

   From 350 to 450 volts for three phase pumps

• All pumps are available with gland packing or mechanical seal.

• Available in bare shaft pump, mono block pump, motor coupled pump and diesel engine coupled pump design.

Applications

 

Industry

• Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension, clean or dirty low viscosity petroleum product or solvents, milk of lime, caustic soda.

 • Washing, cooling, circulation, smoke scrubbing, emergency duty.

• Pumping light chemical, sewage, ash water.

• Tiles, marble & ceramic factories, effluent plants.

• Industries for clear water handling at high pressures.

 

Waste Treatment

• pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension, dosing neutralizing liquids, pumping out settled sludge.

 

Public Utilities

• For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.

• Dewatering basements, trenches and construction sites.

• Dewatering from basements, multi storey, shopping malls, godowns etc.

• Flood drainage, sewage pumping, fire fighting, and recovery of dangerous liquids.

 

Mobile Machinery

• Cooling water for marine engines and shovels.

• Any application where priming is to be avoided.

 

Construction Industry

• Dewatering excavation, canals or ponds, ground water dewatering with well point system or drains, water supply from wells or canals, hosing down concrete castings.

 

Agriculture

• Surface irrigation, liquid manure oxygenation, transfer and spraying liquid manure or fertilizers, distribution of liquid animal feed, transfer of must, washing.

 

Marine

• Loading and unloading, bilge pumping, washing, fire fighting, stripping, sanitary duty and circulation.

Additional Information:

• Packaging Details: PUMP IS COVERED BY A PLASTIC BAG THEN PLACED IN FULLY SECURED WOODEN BOX.

• Efficient design and performance as available in international market.

• Automatic air releasing while priming is design specialty with added feature of quick self priming.

• No need of foot valve.

• Easy maintenance and spares availability.

• Design of impeller is semi open / open vane type for no clogging and enables to handle solid particles up to       40 mm.

• Back pull out design for repair possible without disturbing pipe lines.

• All rotating parts are dynamically balanced for smooth running and low vibration.

• Long product life due to replaceable wearing parts.

• Motor designed for wide voltage fluctuation for mono block pump sets,

   From 180 to 240 volts for single phase pumps

   From 350 to 450 volts for three phase pumps

• All pumps are available with gland packing or mechanical seal.

• Available in bare shaft pump, mono block pump, motor coupled pump and diesel engine coupled pump design.

Applications

 

Industry

• Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension, clean or dirty low viscosity petroleum product or solvents, milk of lime, caustic soda.

 • Washing, cooling, circulation, smoke scrubbing, emergency duty.

• Pumping light chemical, sewage, ash water.

• Tiles, marble & ceramic factories, effluent plants.

• Industries for clear water handling at high pressures.

 

Waste Treatment

• pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension, dosing neutralizing liquids, pumping out settled sludge.

 

Public Utilities

• For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.

• Dewatering basements, trenches and construction sites.

• Dewatering from basements, multi storey, shopping malls, godowns etc.

• Flood drainage, sewage pumping, fire fighting, and recovery of dangerous liquids.

 

Mobile Machinery

• Cooling water for marine engines and shovels.

• Any application where priming is to be avoided.

 

Construction Industry

• Dewatering excavation, canals or ponds, ground water dewatering with well point system or drains, water supply from wells or canals, hosing down concrete castings.

 

Agriculture

• Surface irrigation, liquid manure oxygenation, transfer and spraying liquid manure or fertilizers, distribution of liquid animal feed, transfer of must, washing.

 

Marine

• Loading and unloading, bilge pumping, washing, fire fighting, stripping, sanitary duty and circulation.

Additional Information:

• Packaging Details: PUMP IS COVERED BY A PLASTIC BAG THEN PLACED IN FULLY SECURED WOODEN BOX.

• Efficient design and performance as available in international market.

• Automatic air releasing while priming is design specialty with added feature of quick self priming.

• No need of foot valve.

• Easy maintenance and spares availability.

• Design of impeller is semi open / open vane type for no clogging and enables to handle solid particles up to       40 mm.

• Back pull out design for repair possible without disturbing pipe lines.

• All rotating parts are dynamically balanced for smooth running and low vibration.

• Long product life due to replaceable wearing parts.

• Motor designed for wide voltage fluctuation for mono block pump sets,

   From 180 to 240 volts for single phase pumps

   From 350 to 450 volts for three phase pumps

• All pumps are available with gland packing or mechanical seal.

• Available in bare shaft pump, mono block pump, motor coupled pump and diesel engine coupled pump design.

Applications

 

Industry

• Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension, clean or dirty low viscosity petroleum product or solvents, milk of lime, caustic soda.

 • Washing, cooling, circulation, smoke scrubbing, emergency duty.

• Pumping light chemical, sewage, ash water.

• Tiles, marble & ceramic factories, effluent plants.

• Industries for clear water handling at high pressures.

 

Waste Treatment

• pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension, dosing neutralizing liquids, pumping out settled sludge.

 

Public Utilities

• For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.

• Dewatering basements, trenches and construction sites.

• Dewatering from basements, multi storey, shopping malls, godowns etc.

• Flood drainage, sewage pumping, fire fighting, and recovery of dangerous liquids.

 

Mobile Machinery

• Cooling water for marine engines and shovels.

• Any application where priming is to be avoided.

 

Construction Industry

• Dewatering excavation, canals or ponds, ground water dewatering with well point system or drains, water supply from wells or canals, hosing down concrete castings.

 

Agriculture

• Surface irrigation, liquid manure oxygenation, transfer and spraying liquid manure or fertilizers, distribution of liquid animal feed, transfer of must, washing.

 

Marine

• Loading and unloading, bilge pumping, washing, fire fighting, stripping, sanitary duty and circulation.

Additional Information:

• Packaging Details: PUMP IS COVERED BY A PLASTIC BAG THEN PLACED IN FULLY SECURED WOODEN BOX.